Installing the official release
Download the most recent dmg from the Downloads page.
Verify the checksums.
$ md5 OpenZFS_on_OS_X_*.dmg $ shasum OpenZFS_on_OS_X_*.dmg $ shasum -a 256 OpenZFS_on_OS_X_*.dmg
Open the .dmg file.
Start the installer by opening OpenZFS_on_OS_X_x.y.z.pkg.
Follow the prompts.
If you ever want to uninstall, follow the instructions for uninstalling a release version.
Installing from source
Initial installation from source
Before doing anything else, please set your boot-args.
On macOS Mojave (10.14), High Sierra (10.13), Sierra (10.12), OS X El Capitan (10.11), OS X Mavericks (10.9), and OS X Mountain Lion (10.8) :
sudo nvram boot-args="-v keepsyms=1"
On OS X Yosemite (10.10):
sudo nvram boot-args="-v keepsyms=1 kext-dev-mode=1"
This will take effect the next time you reboot. The argument
-v will make your boot screen verbose instead of just showing the Apple logo, the argument
keepsyms=1 will make your panic reports more useful for us, and the argument
kext-dev-mode=1 (OS X Yosemite ONLY) will allow you to load your custom-built, unsigned kexts kernel extensions. Note that as of OS X El Capitan, kext-dev-mode is obsolete and does nothing. If you are on macOS Sierra (10.12) or OS X El Capitan, you should remove kext-dev-mode from your boot-args to avoid confusion.
If you are a developer, you may want
debug=0x144 in your boot-args as well, as explained here: Development
For macOS Sierra (10.12) and OS X El Capitan (10.11), you also need to boot into the Recovery OS (either the Recovery partition or bootable OS X install media for 10.11) and run
csrutil enable --without kext
The latter will allow you to load your custom-built, unsigned kernel extensions, while keeping the rest of System Integrity Protection (SIP) in place.
(Depending on your needs, other options you may want are
--without dtrace, or
--without nvram. If you specify all of them, that is equivalent to
csrutil disable. The
--without option takes a comma-delimited list or can be specified multiple times:
--without kext,debug,dtrace is equivalent to
--without kext --without debug --without dtrace).
Starting with macOS Catalina, you will probably also want to disable the reboot to load kext using:
spctl kext-consent disable
If you have any other implementation of ZFS installed, you must uninstall it and reboot before proceeding further. Similarly, if you have installed the O3X installer version, please follow the uninstallation directions before proceeding.
- Xcode (from Mac App Store or https://developer.apple.com/downloads/index.action)
- Xcode Command Line Tools (https://developer.apple.com/downloads/index.action)
- Homebrew (or MacPorts)
Note: Xcode 6.3 or later is now required to build due to Broadwell CPU support requirements. Additionally, as of XCode 8, if you are on 10.11 specifically (unnecessary on 10.12), you need to install the CLT (Command Line Tools):
To install Homebrew:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
If you already have Homebrew installed, you should
brew update && brew upgrade
Once Homebrew is installed or updated, you should check the output of
and address any issues it identifies that you know are not false positives.
If you have used brew before, you should also run
Once your system is ready to brew, you should install the following:
brew install automake libtool gawk coreutils
(Note that autoconf will automatically be installed as well because it is a dependency of automake.)
Now that the needed tools are installed, it's time to set up your developer work space. Create two folders in your home directory.
mkdir -p ~/Developer ~/bin chmod 700 ~/Developer ~/bin chmod +a "group:everyone deny delete" ~/Developer ~/bin
Now adjust your PATH variable, unless you know it's already set appropriately.
If you're on OS X Mavericks or above (>= 10.9), run this:
echo 'export PATH=$HOME/bin:$PATH' >> ~/.bash_profile
If you're on OS X Mountain Lion (10.8), you will want to run this instead:
echo 'export PATH=$HOME/bin:/usr/local/bin:$PATH' >> ~/.bash_profile
Then update your environment by sourcing your profile.
cd ~/Developer/ git clone https://gist.github.com/7713854.git zfsadm-repo cp zfsadm-repo/zfsadm ~/bin/
Now you can can build OpenZFS on OS X:
This will take a few minutes, depending on your hardware. There may be some warnings during the compilation. Do not worry about it unless you see errors.
Before using ZFS, we need to actually install it. If you are a developer and wish not to install ZFS, but rather run it from the compile directory, skip ahead.
cd ~/Developer/spl sudo make install cd ~/Developer/zfs sudo make install
You can check to see if the kernel extensions loaded automatically with
kextstat | grep lundman
You should see something similar to
137 1 0xffffff803f61a800 0x20c 0x20c net.lundman.kernel.dependencies (10.0.0) 144 1 0xffffff7f82720000 0xd000 0xd000 net.lundman.spl (1.0.0) <137 7 5 4 3 1> 145 0 0xffffff7f8272d000 0x202000 0x202000 net.lundman.zfs (1.0.0) <144 13 7 5 4 3 1>
If not, make sure kextd is aware of them.
sudo touch /System/Library/Extensions sudo killall -HUP kextd
Now check again.
kextstat | grep lundman
If not, you can load the kexts manually.
cd /System/Library/Extensions sudo kextload spl.kext sudo kextload -d spl.kext zfs.kext
to see if everything is installed and configured properly.
You can go ahead and create your pools at this point.
Running ZFS from the source build
In the ZFS directory there is a script called load.sh which will load the two kext modules. To run userland binaries from the source tree, use the provided cmd.sh script to set the DYNDL_LIBRARY_PATH variable correctly to find the libraries.
Note that load.sh will also start tail -f /var/log/system.log for your convenience.
$ sudo bash# cd ~/Developer/zfs# ./load.shkernel: SPL: Loaded module v1.3.1-15_g4e2ff66 (DEBUG mode), (ncpu 4, memsize 4294967296, pages 1048576) kernel: ZFS: Loaded module v1.3.1-230_gb9658da, ZFS pool version 5000, ZFS filesystem version 5 # ./cmd.sh zpool import BOOM# ./cmd.sh zpool listNAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT BOOM 39.8G 207M 39.5G - 1% 0% 1.00x ONLINE - # ./cmd.sh zpool export BOOMUnmount successful for /Volumes/BOOM # kextunload -b net.lundman.zfskernel: ZFS: Unloaded module v1.3.1-230_gb9658da # kextunload -b net.lundman.splkernel: SPL: Released 524288 bytes from vmem_seg_arena kernel: SPL: Unloaded module. (os_mem_alloc: 0)
Upgrading a source install
When you want to get the latest commits from the GitHub, here's a quick overview of things you need to run.
First make sure you have exported all of your pools.
For every pool listed, run
sudo zpool export $poolname
Alternatively, you can run:
sudo zpool export -a
which will try to export all pools for you.
Make sure they have exported successfully.
It should say, "no pools available."
Get any zfsadm updates:
cd ~/Developer [ -d zfsadm-repo/.git ] && (cd zfsadm-repo ; git pull) [ ! -d zfsadm-repo/.git ] && git clone https://gist.github.com/7713854.git zfsadm-repo cp zfsadm-repo/zfsadm ~/bin/
Now you should be able to upgrade your ZFS installation.
cd ~/Developer cd spl make clean cd .. cd zfs make clean cd .. zfsadm # Assuming the build completed successfully, # unload the kexts. zfsadm -u # Now install the upgrade. cd spl sudo make install cd .. cd zfs sudo make install # And verify they reloaded automatically kextstat | grep lundman # If not, make sure kextd is aware of them sudo touch /Library/Extensions /System/Library/Extensions sudo killall -HUP kextd # and check again kextstat | grep lundman # if they they still have not loaded automatically cd /System/Library/Extensions sudo kextload spl.kext sudo kextload -d spl.kext zfs.kext
Uninstalling a source install
If you ever want to uninstall, follow the instructions for uninstalling a source install.
Using without actually installing (development)
This method is usually appropriate only for Developers.
The procedure is the same as found in the section installing from source except that you never run "make install." Instead you load the kexts manually, and execute the binaries directly from the source tree.
You can load the kexts manually by running
By default, zfsadm -k will copy spl.kext and zfs.kext from the source where they were built to /System/Library/Extensions, recursively change the ownership of everything in /System/Library/Extensions/spl.kext and /System/Library/Extensions/zfs.kext to be owned by the user "root" and the group "wheel," and then load the kexts directly from /System/Library/Extensions. If you prefer to use a different directory, use the -i option in zfsadm or edit zfsadm to hard code a different directory.
If you do not wish to use zfsadm, you can do all of this yourself, using whatever target directory you'd like. For example, you might do the following:
cd /tmp sudo rm -rf o3x sudo mkdir o3x cd ~/Developer sudo cp -R zfs/module/zfs/zfs.kext /tmp/o3x/ sudo cp -R spl/module/spl/spl.kext /tmp/o3x/ cd /tmp/o3x sudo chown -R * sudo kextload spl.kext sudo kextload -d spl.kext zfs.kext
Once the kexts have been loaded, you can test the commands.
Migrating old pools (from MacZFS or ZEVO)
First export all of your pools, and uninstall the other implementation. It is all right if you forgot to export your pools before uninstalling. You will just need to use the '-f' option when importing into OpenZFS on OS X.
To find out the pool names, you need to execute the command for pool discovery.
sudo zpool import
This will tell you what pools are available to be imported, but will not actually import anything. You can see that nothing has been imported yet by using the 'zpool status' command.
Now that you know what pools are available to be imported, you can actually import a pool by supplying the name or guid that you saw during pool discovery.
sudo zpool import poolname (or guid)
(Notice how this differs from the command for pool discovery.)
If you forgot to export before migrating, you will need to use the '-f' option.
sudo zpool import -f poolname (or guid)
If you want to see the same information you saw during pool discovery, you will now need to use 'zpool status' rather than 'zpool import'.
If all pools have been imported, the pool discovery command— 'zpool import' with no pool or guid specified— will return without any output.
sudo zpool import