- Code: Select all
pool: pool
state: ONLINE
scan: resilvered 1.44T in 61h11m with 0 errors on Fri Mar 16 04:25:48 2018
config:
NAME STATE READ WRITE CKSUM
pool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
media-E1326908-B107-C241-B0BF-DE4EBBDDE316 ONLINE 0 0 0
media-A4764562-BB31-364F-B086-6E654B974759 ONLINE 0 0 0
if I go to zpool list this is what I see (which only still shows 2TB when the disks are 4 TB each)
- Code: Select all
sudo zpool list
Password:
NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
pool 1.81T 1.44T 378G 1.81T 42% 79% 1.00x ONLINE -
this is what I see in disk utility
- Code: Select all
/dev/disk2 (external, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *4.0 TB disk2
1: ZFS pool 4.0 TB disk2s1
2: 6A945A3B-1DD2-11B2-99A6-080020736631 8.4 MB disk2s9
/dev/disk3 (external, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *4.0 TB disk3
1: ZFS pool 4.0 TB disk3s1
2: 6A945A3B-1DD2-11B2-99A6-080020736631 8.4 MB disk3s9
How can I get the full capacity of the drives recognized so I can have a 4TB mirror pool? Thanks
Edit: I googled a bit and found out I need to turn autoexpand=on, which I did. When I tried the second command this is what I get, am I doing something wrong? I tried /dev/disk2 and it didn't work either ("no such device in pool").
- Code: Select all
sudo zpool online -e pool media-E1326908-B107-C241-B0BF-DE4EBBDDE316
cannot expand media-E1326908-B107-C241-B0BF-DE4EBBDDE316: cannot relabel '/private/var/run/disk/by-id/media-E1326908-B107-C241-B0BF-DE4EBBDDE316': unable to open device: 16
Edit 2: I got it working, I found this thread https://openzfsonosx.org/forum/viewtopic.php?f=11&t=3040, which worked for me. Thanks