1.9.1 install panic on iMac Pro and other issues

All your general support questions for OpenZFS on OS X.

Re: 1.9.1 install panic on iMac Pro and other issues

Postby lundman » Wed Jul 31, 2019 7:24 pm

Great, I like when things make sense -

ok, taking AVX512F out again, then enabling everything in raidz as well, except for the AVX512*. This should load, and will be what 1.9.2 will be after this debug session
Attachments
zfs7.kext.zip
(1.53 MiB) Downloaded 418 times
User avatar
lundman
 
Posts: 1334
Joined: Thu Mar 06, 2014 2:05 pm
Location: Tokyo, Japan

Re: 1.9.1 install panic on iMac Pro and other issues

Postby Jimbo » Wed Jul 31, 2019 7:31 pm

Unfortunately... it went bang. I'll just reconfirm though, make sure I've used the correct kext.
Jimbo
 
Posts: 149
Joined: Sun Sep 17, 2017 5:12 am

Re: 1.9.1 install panic on iMac Pro and other issues

Postby lundman » Wed Jul 31, 2019 7:32 pm

Bah, my bad - I didnt comment out the one in fletcher, one sec
User avatar
lundman
 
Posts: 1334
Joined: Thu Mar 06, 2014 2:05 pm
Location: Tokyo, Japan

Re: 1.9.1 install panic on iMac Pro and other issues

Postby lundman » Wed Jul 31, 2019 7:33 pm

ok THIS one
Attachments
zfs8.kext.zip
(1.53 MiB) Downloaded 370 times
User avatar
lundman
 
Posts: 1334
Joined: Thu Mar 06, 2014 2:05 pm
Location: Tokyo, Japan

Re: 1.9.1 install panic on iMac Pro and other issues

Postby Jimbo » Wed Jul 31, 2019 7:36 pm

THAT one works. :-)

Loaded fine:
Code: Select all
Filtering the log data using "sender == "zfs" OR sender == "spl""
Timestamp               Ty Process[PID:TID]
2019-08-01 03:35:10.612 Df kernel[0:20c] (spl) <spl`spl_start> SPL: loading
2019-08-01 03:35:10.612 Df kernel[0:1433] (spl) <spl`spl_kmem_init> SPL: KMEM starting. Total memory 2147483648
2019-08-01 03:35:10.612 Df kernel[0:1433] (spl) <spl`vmem_init> SPL: vmem_init: real_total_memory 4294967296, large spans 1048576, small spans 262144
2019-08-01 03:35:10.612 Df kernel[0:1433] (spl) <spl`vmem_init> SPL: vmem_init adding fixed allocation of 268435456 to the bucket_heap
2019-08-01 03:35:10.634 Df kernel[0:1433] (spl) <spl`vmem_init> SPL: starting vmem_update() thread
2019-08-01 03:35:10.635 Df kernel[0:1433] (spl) <spl`spl_kmem_init> SPL: spl_zio_no_grow_init done.
2019-08-01 03:35:10.635 Df kernel[0:1437] (spl) <spl`spl_free_thread> SPL: beginning spl_free_thread() loop, spl_free == 32395264
2019-08-01 03:35:10.635 Df kernel[0:1433] (spl) <spl`spl_start_continue> SPL: Loaded module v1.9.1-0, (ncpu 2, memsize 2147483648, pages 524288)
2019-08-01 03:35:12.672 Df kernel[0:143f] (zfs) <zfs`zfs_ioctl_osx_init> ZFS: Loaded module v1.9.0-39-g3ca683e4d0 (DEBUG mode), ZFS pool version 5000, ZFS filesystem version 5
2019-08-01 03:35:12.672 Df kernel[0:143f] (zfs) <zfs`zfs_init> ZFS filesystem version: 5


Cheers!
James

Edit: Spelling
Jimbo
 
Posts: 149
Joined: Sun Sep 17, 2017 5:12 am

Re: 1.9.1 install panic on iMac Pro and other issues

Postby lundman » Wed Jul 31, 2019 7:38 pm

Ok, one final one then, since raidz defines AVX512F and AVX512BW, so this one has just AVX512BW enabled to see if
all AVX512 are bad, or just AVX512F.
Attachments
zfs9.kext.zip
(1.53 MiB) Downloaded 376 times
User avatar
lundman
 
Posts: 1334
Joined: Thu Mar 06, 2014 2:05 pm
Location: Tokyo, Japan

Re: 1.9.1 install panic on iMac Pro and other issues

Postby Jimbo » Wed Jul 31, 2019 7:42 pm

That kext, also good:

Code: Select all
2019-08-01 03:41:20.989 Df kernel[0:20c] (spl) <spl`spl_start> SPL: loading
2019-08-01 03:41:20.989 Df kernel[0:1a38] (spl) <spl`spl_kmem_init> SPL: KMEM starting. Total memory 2147483648
2019-08-01 03:41:20.989 Df kernel[0:1a38] (spl) <spl`vmem_init> SPL: vmem_init: real_total_memory 4294967296, large spans 1048576, small spans 262144
2019-08-01 03:41:20.989 Df kernel[0:1a38] (spl) <spl`vmem_init> SPL: vmem_init adding fixed allocation of 268435456 to the bucket_heap
2019-08-01 03:41:21.010 Df kernel[0:1a38] (spl) <spl`vmem_init> SPL: starting vmem_update() thread
2019-08-01 03:41:21.011 Df kernel[0:1a38] (spl) <spl`spl_kmem_init> SPL: spl_zio_no_grow_init done.
2019-08-01 03:41:21.012 Df kernel[0:1a3b] (spl) <spl`spl_free_thread> SPL: beginning spl_free_thread() loop, spl_free == 32567296
2019-08-01 03:41:21.012 Df kernel[0:1a38] (spl) <spl`spl_start_continue> SPL: Loaded module v1.9.1-0, (ncpu 2, memsize 2147483648, pages 524288)
2019-08-01 03:41:21.184 Df kernel[0:1a41] (zfs) ZFS: Loading module ...
2019-08-01 03:41:23.080 Df kernel[0:1a42] (zfs) ZFS: Loaded module v1.9.0-39-g3ca683e4d0 (DEBUG mode), ZFS pool version 5000, ZFS filesystem version 5
2019-08-01 03:41:23.080 Df kernel[0:1a42] (zfs) ZFS filesystem version: 5
Jimbo
 
Posts: 149
Joined: Sun Sep 17, 2017 5:12 am

Re: 1.9.1 install panic on iMac Pro and other issues

Postby lundman » Wed Jul 31, 2019 7:47 pm

rreeeeaally, now that is surprising. So only AVX512F is bad.

Thanks for your assistance, I'll remove the AVX512* capabilities for 1.9.2, and dig deeper when I get my hands on some hardware with a newer CPU.
User avatar
lundman
 
Posts: 1334
Joined: Thu Mar 06, 2014 2:05 pm
Location: Tokyo, Japan

Re: 1.9.1 install panic on iMac Pro and other issues

Postby Jimbo » Wed Jul 31, 2019 7:48 pm

Not a problem. In the interim if you need something tested, I'm happy to help.

Cheers!
James
Jimbo
 
Posts: 149
Joined: Sun Sep 17, 2017 5:12 am

Re: 1.9.1 install panic on iMac Pro and other issues

Postby lundman » Wed Jul 31, 2019 9:01 pm

This is the pkg that 1.9.2 will be (although it says 1.9.1 in it).
Attachments
out-1014-signed.pkg
(9.04 MiB) Downloaded 407 times
User avatar
lundman
 
Posts: 1334
Joined: Thu Mar 06, 2014 2:05 pm
Location: Tokyo, Japan

PreviousNext

Return to General Help

Who is online

Users browsing this forum: No registered users and 3 guests

cron