Raidz1 2 disk resilver, now won't load?

All your general support questions for OpenZFS on OS X.

Raidz1 2 disk resilver, now won't load?

Postby carpman » Fri Feb 09, 2018 1:21 am

Hi, I have a 4 drive Raidz1 in which one drive failed, I replaced this drive, but after a while I checked status and 2 drives were resilvering?

After a forced reboot I can't load the pool, it is reported as available by zpool import, but on running import via terminal it never loads and terminal never returns to prompt.

No drive active takes place either!

Any ideas?

Thanks
carpman
 
Posts: 13
Joined: Wed Mar 18, 2015 7:52 am

Re: Raidz1 2 disk resilver, now won't load?

Postby lundman » Fri Feb 09, 2018 11:39 am

Show us some "zpool status" and messages produced in log, so we can get a feel for it.. I could be something harmless like "unlinked drain". Versions of zfs and osx too
User avatar
lundman
 
Posts: 486
Joined: Thu Mar 06, 2014 2:05 pm
Location: Tokyo, Japan

Re: Raidz1 2 disk resilver, now won't load?

Postby carpman » Sun Feb 11, 2018 11:39 pm

Apologies for delay in replying,

here outputs from log files.


org.openzfsonosx.zed.err 660mb in size

Code: Select all
tail -n50 org.openzfsonosx.zed.err
Invoking "checksum-spare.sh" eid=228 pid=1619
Finished "checksum-spare.sh" eid=228 pid=1619 exit=2
Invoking "all-syslog.sh" eid=229 pid=1620
Finished "all-syslog.sh" eid=229 pid=1620 exit=0
Invoking "checksum-notify.sh" eid=229 pid=1622
Finished "checksum-notify.sh" eid=229 pid=1622 exit=3
Invoking "checksum-spare.sh" eid=229 pid=1639
Finished "checksum-spare.sh" eid=229 pid=1639 exit=2
Invoking "all-syslog.sh" eid=230 pid=1640
Finished "all-syslog.sh" eid=230 pid=1640 exit=0
Invoking "checksum-notify.sh" eid=230 pid=1642
Finished "checksum-notify.sh" eid=230 pid=1642 exit=3
Invoking "checksum-spare.sh" eid=230 pid=1659
Finished "checksum-spare.sh" eid=230 pid=1659 exit=2
Invoking "all-syslog.sh" eid=231 pid=1660
Finished "all-syslog.sh" eid=231 pid=1660 exit=0
Invoking "checksum-notify.sh" eid=231 pid=1662
Finished "checksum-notify.sh" eid=231 pid=1662 exit=3
Invoking "checksum-spare.sh" eid=231 pid=1679
Finished "checksum-spare.sh" eid=231 pid=1679 exit=2
Invoking "all-syslog.sh" eid=232 pid=1680
Finished "all-syslog.sh" eid=232 pid=1680 exit=0
Invoking "checksum-notify.sh" eid=232 pid=1682
Finished "checksum-notify.sh" eid=232 pid=1682 exit=3
Invoking "checksum-spare.sh" eid=232 pid=1699
Finished "checksum-spare.sh" eid=232 pid=1699 exit=2
Invoking "all-syslog.sh" eid=233 pid=1700
Finished "all-syslog.sh" eid=233 pid=1700 exit=0
Invoking "checksum-notify.sh" eid=233 pid=1702
Finished "checksum-notify.sh" eid=233 pid=1702 exit=3
Invoking "checksum-spare.sh" eid=233 pid=1719
Finished "checksum-spare.sh" eid=233 pid=1719 exit=2
Invoking "all-syslog.sh" eid=234 pid=1720
Finished "all-syslog.sh" eid=234 pid=1720 exit=0
Invoking "all-syslog.sh" eid=235 pid=1722
Finished "all-syslog.sh" eid=235 pid=1722 exit=0
Invoking "all-syslog.sh" eid=236 pid=1724
Finished "all-syslog.sh" eid=236 pid=1724 exit=0
Invoking "all-syslog.sh" eid=237 pid=1726
Finished "all-syslog.sh" eid=237 pid=1726 exit=0
Invoking "all-syslog.sh" eid=238 pid=1728
Finished "all-syslog.sh" eid=238 pid=1728 exit=0
Invoking "all-syslog.sh" eid=239 pid=1730
Finished "all-syslog.sh" eid=239 pid=1730 exit=0
Invoking "all-syslog.sh" eid=240 pid=1732
Finished "all-syslog.sh" eid=240 pid=1732 exit=0
Invoking "data-notify.sh" eid=240 pid=1734
Finished "data-notify.sh" eid=240 pid=1734 exit=3
Invoking "all-syslog.sh" eid=241 pid=1751
Finished "all-syslog.sh" eid=241 pid=1751 exit=0


org.openzfsonosx.zpool-import-all.err 174 bytes

Code: Select all
tail -n50 org.openzfsonosx.zpool-import-all.err
no pools available to import
no pools available to import
no pools available to import
no pools available to import
no pools available to import
no pools available to import



org.openzfsonosx.zpool-import-all.log 30kb

Code: Select all
tail -n50 org.openzfsonosx.zpool-import-all.log
Fri Feb  9 18:55:57 GMT 2018
Running zpool import -a
Fri Feb  9 18:56:07 GMT 2018
+zpool-import-all.sh
Fri Feb  9 19:17:36 GMT 2018
       12.03 real         0.59 user         0.45 sys
Waiting up to 60 seconds for the InvariantDisks idle file /var/run/disk/invariant.idle to exist
Found /var/run/disk/invariant.idle after 0 iterations of sleeping 0.1 seconds
Fri Feb  9 19:17:48 GMT 2018
Running zpool import -a
Fri Feb  9 19:17:58 GMT 2018
Fri Feb  9 19:17:58 GMT 2018
Finished running zpool import -a : 0
Touching the file /var/run/org.openzfsonosx.zpool-import-all.didRun
Fri Feb  9 19:17:58 GMT 2018
-zpool-import-all.sh
+zpool-import-all.sh
Fri Feb  9 20:16:27 GMT 2018
       11.79 real         0.60 user         0.41 sys
Waiting up to 60 seconds for the InvariantDisks idle file /var/run/disk/invariant.idle to exist
Found /var/run/disk/invariant.idle after 0 iterations of sleeping 0.1 seconds
Fri Feb  9 20:16:39 GMT 2018
Running zpool import -a
Fri Feb  9 20:16:49 GMT 2018
+zpool-import-all.sh
Fri Feb  9 20:25:52 GMT 2018
        7.58 real         0.67 user         0.48 sys
Waiting up to 60 seconds for the InvariantDisks idle file /var/run/disk/invariant.idle to exist
Found /var/run/disk/invariant.idle after 0 iterations of sleeping 0.1 seconds
Fri Feb  9 20:26:00 GMT 2018
Running zpool import -a
Fri Feb  9 20:26:10 GMT 2018
Fri Feb  9 20:26:10 GMT 2018
Finished running zpool import -a : 0
Touching the file /var/run/org.openzfsonosx.zpool-import-all.didRun
Fri Feb  9 20:26:10 GMT 2018
-zpool-import-all.sh
+zpool-import-all.sh
Fri Feb  9 20:42:23 GMT 2018
       11.68 real         0.60 user         0.45 sys
Waiting up to 60 seconds for the InvariantDisks idle file /var/run/disk/invariant.idle to exist
Found /var/run/disk/invariant.idle after 0 iterations of sleeping 0.1 seconds
Fri Feb  9 20:42:35 GMT 2018
Running zpool import -a
Fri Feb  9 20:42:45 GMT 2018
Fri Feb  9 20:42:45 GMT 2018
Finished running zpool import -a : 0
Touching the file /var/run/org.openzfsonosx.zpool-import-all.didRun
Fri Feb  9 20:42:45 GMT 2018
-zpool-import-all.sh



org.openzfsonosx.zconfigd.err 5kb

Code: Select all
tail -n50 org.openzfsonosx.zconfigd.err
Starting the run loop
Found match
Looking for service matching net_lundman_zfs_zvol
Starting the run loop
Found match
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
Looking for service matching net_lundman_zfs_zvol
Found match
Starting the run loop
carpman
 
Posts: 13
Joined: Wed Mar 18, 2015 7:52 am

Re: Raidz1 2 disk resilver, now won't load?

Postby lundman » Mon Feb 12, 2018 7:13 am

Output from:

zpool status (presumably has no pools)

zpool import -d /dev/
User avatar
lundman
 
Posts: 486
Joined: Thu Mar 06, 2014 2:05 pm
Location: Tokyo, Japan

Re: Raidz1 2 disk resilver, now won't load?

Postby carpman » Mon Feb 12, 2018 1:31 pm

Hi and thanks for reply.

Both these commands result in terminal hang!

Logs updated with today's date are empty?
Attachments
20180213_091036_Film9-600x1067.jpg
20180213_091036_Film9-600x1067.jpg (209.97 KiB) Viewed 1090 times
carpman
 
Posts: 13
Joined: Wed Mar 18, 2015 7:52 am

Re: Raidz1 2 disk resilver, now won't load?

Postby lundman » Tue Feb 13, 2018 12:05 pm

kextstatus | grep -i zfs ?
User avatar
lundman
 
Posts: 486
Joined: Thu Mar 06, 2014 2:05 pm
Location: Tokyo, Japan

Re: Raidz1 2 disk resilver, now won't load?

Postby Brendon » Wed Feb 14, 2018 11:46 am

I short we wonder if you have a hybrid maczfs/openzfs install.

Those log files (maczfs.log) don't come from us!

Brendon
Brendon
 
Posts: 285
Joined: Thu Mar 06, 2014 12:51 pm

Re: Raidz1 2 disk resilver, now won't load?

Postby carpman » Mon Feb 19, 2018 5:37 pm

Hi, sorry for delay in replying, been down with flu.

Tried you command,

Code: Select all
kextstatus | grep -i zfs ?
kextstatus: command not found



tried


Code: Select all
kextstat | grep -i zfs ?
kextstat: unrecognised option `-i'


did kextstat and looked through list, only entries I can find relating to zfs are:

Code: Select all
net.lundman.kernal.dependancies.28
net.lundman.spl (1.6.1)
net.lundman.zfs (1.6.1)


Yes i believe that maczfs was once installed, though thought this was deleted, seems log files got left behind.

Thanks
carpman
 
Posts: 13
Joined: Wed Mar 18, 2015 7:52 am

Re: Raidz1 2 disk resilver, now won't load?

Postby carpman » Mon Feb 26, 2018 1:05 pm

Hi, any ideas?

Thanks
carpman
 
Posts: 13
Joined: Wed Mar 18, 2015 7:52 am

Re: Raidz1 2 disk resilver, now won't load?

Postby e8vww » Tue Feb 27, 2018 2:19 am

carpman wrote:Hi, any ideas?

Thanks


There hasn't been any activity from the devs in a while. I'm wondering if there is another forum that would be a better place to get help. As it is, they should have a big bold warning for people to please keep backups of their openzfs on osx. Its not perfected yet and there is no support.
e8vww
 
Posts: 51
Joined: Fri Nov 24, 2017 2:06 pm

Next

Return to General Help

Who is online

Users browsing this forum: No registered users and 1 guest

cron