Despite this, the pool and its filesystems mount in the Finder and the pool is working fine otherwise.
The pool shows as follows:
- Code: Select all
pool: ext-bkup
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: none requested
config:
NAME STATE READ WRITE CKSUM
ext-bkup ONLINE 0 0 0
media-66AA6995-02B3-4151-AD7D-9131C28B7095 ONLINE 0 0 0
Oddly, according to the OS, the disk is listed thusly:
- Code: Select all
/dev/disk6 (external, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *6.0 TB disk6
1: Microsoft Basic Data 6.0 TB disk6s1
So despite the disk mounting properly, at least some part of the OS is confusing ZFS for "Microsoft Basic Data".
The OS is 10.13.2.