I would like all disks to show their serial numbers when checking status...
this way I could just put a sticker tag on each physical drive to identify them easily if one needs to be changed.
This is the way they show now:
- Code: Select all
bash-3.2# zpool status
pool: ocean
state: ONLINE
scan: scrub in progress since Fri Oct 23 15:05:49 2015
1.64T scanned out of 9.50T at 409M/s, 5h35m to go
0 repaired, 17.28% done
config:
NAME STATE READ WRITE CKSUM
ocean ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
media-D66A118E-5447-8646-A572-A57FAAB83663 ONLINE 0 0 0
media-36917999-BFAB-0742-B5A7-7152FBBB8F46 ONLINE 0 0 0
media-BB8FDCE9-6092-6C43-9F67-AEC45EE604B8 ONLINE 0 0 0
ST3000DM001-1ER166-Z5006B1D:1 ONLINE 0 0 0
PCI0@0-IDE1@1F,2-PRT4@4-PMP@0-@0:1 ONLINE 0 0 0
PCI0@0-IDE1@1F,2-PRT5@5-PMP@0-@0:1 ONLINE 0 0 0
errors: No known data errors
The disks are 6 x 3TB Seagate Barracuda ST3000DM001 hooked up to three different controllers (all on the motherboard.. yes, it's a hackintosh).
How can I make them all appear as the three first disks?
Thanks in advance for any help or advice.
Robert