I just upgraded from 10.9 to 10.11 which required a full format of my drive because it changed from Chameleon to Clover. I did make sure to do a full Time Machine and Carbon Copy Clover backup before I made the move. Unfortunately with all my prep work, I forgot to export my zpool.
I get El capitan working fine and install OpenZFS v1.4.5 and I see my pool, WolfsDen, sitting in /Volumes/. Great! Except... it's empty. HELP PLZ. Here is info:
- Code: Select all
redwolf:/ sangie$ diskutil list
/dev/disk0 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *256.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Wuffintosh 255.2 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *3.0 TB disk1
1: ZFS 3.0 TB disk1s1
2: 6A945A3B-1DD2-11B2-99A6-080020736631 8.4 MB disk1s9
/dev/disk2 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *3.0 TB disk2
1: ZFS 3.0 TB disk2s1
2: 6A945A3B-1DD2-11B2-99A6-080020736631 8.4 MB disk2s9
/dev/disk3 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *3.0 TB disk3
1: ZFS 3.0 TB disk3s1
2: 6A945A3B-1DD2-11B2-99A6-080020736631 8.4 MB disk3s9
/dev/disk4 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *3.0 TB disk4
1: ZFS 3.0 TB disk4s1
2: 6A945A3B-1DD2-11B2-99A6-080020736631 8.4 MB disk4s9
/dev/disk5 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *2.0 TB disk5
1: Windows_NTFS 2.0 TB disk5s1
2: 0x27 471.9 MB disk5s2
- Code: Select all
pool: WolfsDen
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: resilvered 136G in 0h47m with 0 errors on Mon Dec 7 03:23:46 2015
config:
NAME STATE READ WRITE CKSUM
WolfsDen ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
media-1C10C742-B4CA-B44E-BD73-6211437682DA ONLINE 0 0 0
media-3D60F1EF-D417-A046-B583-244CC602F921 ONLINE 0 0 0
disk3 ONLINE 0 0 0
disk4 ONLINE 0 0 0
errors: No known data errors
- Code: Select all
redwolf:/ sangie$ zpool list
NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
WolfsDen 10.9T 6.72T 4.15T - - 61% 1.00x ONLINE -
- Code: Select all
redwolf:/ sangie$ sudo zpool import
Password:
no pools available to import
- Code: Select all
redwolf:/ sangie$ zfs get all
NAME PROPERTY VALUE SOURCE
WolfsDen type filesystem -
WolfsDen creation Sun Jun 29 2:25 2014 -
WolfsDen used 4.89T -
WolfsDen available 2.77T -
WolfsDen referenced 4.88T -
WolfsDen compressratio 1.03x -
WolfsDen mounted yes -
WolfsDen quota none default
WolfsDen reservation none default
WolfsDen recordsize 128K default
WolfsDen mountpoint /Volumes/WolfsDen default
WolfsDen sharenfs off default
WolfsDen checksum on default
WolfsDen compression lz4 local
WolfsDen atime off local
WolfsDen devices on default
WolfsDen exec on default
WolfsDen setuid on default
WolfsDen readonly off default
WolfsDen zoned off default
WolfsDen snapdir hidden default
WolfsDen aclmode discard default
WolfsDen aclinherit restricted default
WolfsDen canmount on default
WolfsDen xattr on default
WolfsDen copies 1 default
WolfsDen version 5 -
WolfsDen utf8only on -
WolfsDen normalization formD -
WolfsDen casesensitivity insensitive -
WolfsDen vscan off default
WolfsDen nbmand off default
WolfsDen sharesmb off default
WolfsDen refquota none default
WolfsDen refreservation none default
WolfsDen primarycache all default
WolfsDen secondarycache all default
WolfsDen usedbysnapshots 0 -
WolfsDen usedbydataset 4.88T -
WolfsDen usedbychildren 132M -
WolfsDen usedbyrefreservation 0 -
WolfsDen logbias latency default
WolfsDen dedup off default
WolfsDen mlslabel none default
WolfsDen sync standard default
WolfsDen refcompressratio 1.03x -
WolfsDen written 4.88T -
WolfsDen logicalused 5.02T -
WolfsDen logicalreferenced 5.02T -
WolfsDen filesystem_limit none default
WolfsDen snapshot_limit none default
WolfsDen filesystem_count none default
WolfsDen snapshot_count none default
WolfsDen snapdev hidden default
WolfsDen com.apple.browse on default
WolfsDen com.apple.ignoreowner off default
WolfsDen com.apple.mimic_hfs off default
WolfsDen redundant_metadata all default
WolfsDen overlay off default
- Code: Select all
redwolf:/ sangie$ zfs mount WolfsDen
cannot mount 'WolfsDen': filesystem already mounted