Hello,
I run OpenZFS 1.3.0 on OSX 1.9.4. on a hackintosh
The pool is a single hard drive pool and seems to be working fine, I only cannot run a scrub.
When I launch the command it does not return to the prompt in the terminal.
The finder stops displaying the files and directories.
I ran several checksum checks on different data on the drive and they come out identical as on HPFS+.
The pool has all features enabled.
The pool was created with the 0.6.2 version and was scrubbing.
https://github.com/openzfsonosx/zfs/releases
I re-installed the system, installed OpenZFS 1.3.0
Could anyone please help me how to test integrity of the pool?
Thank you
Jonas
jonass-mac-pro:~ Jonas$ zpool list
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
ZFSTank 3.62T 2.75T 893G 75% 1.00x ONLINE -
jonass-mac-pro:~ Jonas$ zpool scrub ZFSTank
new terminal window:
jonass-mac-pro:~ Jonas$ Zpool status
pool: ZFSTank
state: UNAVAIL
status: One or more devices are faulted in response to IO failures.
action: Make sure the affected devices are connected, then run 'zpool clear'.
see: http://zfsonlinux.org/msg/ZFS-8000-HC
scan: scrub repaired 0 in 6h51m with 0 errors on Wed May 21 18:52:39 2014
config:
NAME STATE READ WRITE CKSUM
ZFSTank UNAVAIL 0 0 0 insufficient replicas
disk3 UNAVAIL 0 0 0 cannot open
errors: 3 data errors, use '-v' for a list