Absolute noob trying to setup mirrored vdevs

[dangriga]

Appreciate the help!
I am currently backing up the pool with my RAID Recovery software as I have changed some things with my files that I would like to keep and not have to go back to the backup. That's why I wont be doing a pool export for now as I want to be done with that first.

With the df command I get this (it does not even show the disks from the pool?):

Filesystem 512-blocks Used Available Capacity iused ifree %iused Mounted on
/dev/disk3s1s1 965595304 17698296 255237432 7% 355382 1276187160 0% /
devfs 464 464 0 100% 805 0 100% /dev
/dev/disk3s6 965595304 6291600 255237432 3% 3 1276187160 0% /System/Volumes/VM
/dev/disk3s2 965595304 18182984 255237432 7% 1212 1276187160 0% /System/Volumes/Preboot
/dev/disk3s4 965595304 83648 255237432 1% 70 1276187160 0% /System/Volumes/Update
/dev/disk1s2 1024000 12328 987064 2% 3 4935320 0% /System/Volumes/xarts
/dev/disk1s1 1024000 12640 987064 2% 30 4935320 0% /System/Volumes/iSCPreboot
/dev/disk1s3 1024000 2248 987064 1% 39 4935320 0% /System/Volumes/Hardware
/dev/disk3s5 965595304 666229912 255237432 73% 1242805 1276187160 0% /System/Volumes/Data
map auto_home 0 0 0 100% 0 0 100% /System/Volumes/Data/home


The problem is because I cannot import the pool, zpool history and other commands won't work...

But yes I am thinking more and more of a rebuild now and doing it properly this time. Meaning importing all the disks with their Serialnumber as the name and as well setting up a automatic ZFS Snapshot system (backing up the pool every day). But of course if it is possible to save this pool and go from there that would be ideal.


But again thanks to all of you for the help. Without this forum I would be completely lost.