Currently when I try to mount with "sudo ifs mount Data", the system returns:
cannot mount 'Data': legacy mountpoint
use mount(8) to mount this filesystem
I can't figure out how to mount using "mount(8)"... any idea what very obvious thing I'm missing here? Is there other status info I can share that may help?
zpool status:
pool: Data
state: ONLINE
status: Some supported and requested features are not enabled on the pool.
The pool can still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
scan: scrub repaired 0B in 09:22:12 with 0 errors on Sun Nov 27 11:22:13 2022
config:
NAME STATE READ WRITE CKSUM
Data ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
media-D061C494-602B-11E8-8C97-E0D55EA38449 ONLINE 0 0 0
media-D1101EAA-602B-11E8-8C97-E0D55EA38449 ONLINE 0 0 0
media-D1C4810A-602B-11E8-8C97-E0D55EA38449 ONLINE 0 0 0
media-D281C1EC-602B-11E8-8C97-E0D55EA38449 ONLINE 0 0 0
media-D3370FF8-602B-11E8-8C97-E0D55EA38449 ONLINE 0 0 0
errors: No known data errors